Before you can get perfect pictures on your Element TV, you will have to work on its advanced settings. But if you don’t know how to carry out this task, it might become a frustrating task.
You can make things easier by using a guide. If you don’t have one, you should try the following settings listed in this article.
Element TV Advanced Settings
Here are some of the top settings for adjusting the advanced settings on Element TVs. But before using these settings, we suggest that you check the manual for additional advice.
Element TV Advanced Settings for General Picture Settings
- Zoom Mode: Auto
- Color Temperature: Warm
- Noise Reduction: Off
- Motion Smoothing: Bypass
- Color Mode: Auto
- EDID Mode: Mode 2
Element TV Advanced Settings for Custom Picture Mode
- Zoom Mode: Auto
- Color Temperature: Cold
- Noise Reduction: Off
- Motion Smoothing: Bypass
- Color Mode: Auto
- EDID Mode: Mode 2
Element TV Advanced Settings for General Picture Settings
If you are viewing standard content on an Element TV, you can set the Zoom and Color Modes to Auto. Then leave the Color Temperature at Cold with Motion Smoothing on Bypass. Then set the Color Mode to Auto while the EDID Mode stays on Mode 2.
Alternative Element TV Advanced Settings for General Picture Settings
Thinking of using the Advanced Settings for a Custom Picture Mode? Well, you can start by setting the Zoom Mode to Auto while the Color Temperature stays on Cold.
As for the Noise Reduction and Motion Smoothing, leave the setting on Off and Bypass. Then set the Color Mode and EDID Mode to Auto and Mode 2.
Can I Get a Perfect Picture by Setting Only the Advanced Settings?
Tuning the brightness on an Element TV can be a great idea. But if the other picture settings are wrong, you might end up with annoying results. You can avoid this scenario by choosing the best picture settings for your device.
- Picture Mode: Custom
- Backlight: 33
- Brightness: 50
- Contrast: 50
- Saturation: 50
- Tint : 50
- Sharpness: 0
As you adjust the setting, make sure the picture mode stays on Custom. Then leave the Backlight on 33 while the Brightness remains at 50. As for the Contrast, Saturation and Tint, keep them at 50 while sharpness stays at 0.
How to Fix Greyed Out Advanced Element Settings
If you cannot access the advanced settings menu of the Element TV, getting the ideal picture becomes impossible. However, here are some hacks for dealing with this issue.
Reset the TV
With a quick reset, you can reboot the Advanced Settings on the Element TV. As expected, this hack does not require any experience. For the best results, use the following steps
- Press Menu on the remote
- Scroll to TV Settings
- Choose General- Restore Default
- Check if the Advanced Settings Menu is still grey
Get a New Source Mode
If you still have issues with the Element TV Advanced Settings, switch to a new source mode. Normally, this hack should make the Advanced Settings Menu active.
You can change the Source Settings by:-
- Press the Source button on the remote
- Scroll to your preferred Source
- Choose the Source
- Exit the Settings and check if the Menu is active
Contact the Element Support Service
If you have any issues with the Element TV Advanced Settings, call or email Element Tech Support. Asides from offering solid advice, this platform provides the best hands for such problems. Depending on the service rendered, you might not even spend much on the problem.
