Owning a Scotts Turf Builder spreader can be a great idea. But without the right settings, you might not cover your grass properly.
Luckily, we have listed the best figures needed for adjusting the spreader. So if you are not sure of the proper way to use this device, feel free to use our guide.
Scotts Turf Builder Settings
Here are the top settings needed for using different models of the Scotts Turf Builder. But before using these figures, we suggest that you check the back label of your preferred chemical or seed.
- The Scotts Turf Builder Settings for Scotts Turf Builder Lawn Food – 3¾
- The Scotts Turf Builder Settings for Scotts Scotts Turf Builder Thick’R Lawn Sun & Shade – 9
- The Scotts Turf Builder Settings for Scotts Turf Builder Halts Crabgrass Preventer with Lawn Food – 3
- The Scotts Turf Builder Settings for Scotts Turf Builder Winterguard Fall Weed & Feed – 3½
- The Scotts Turf Builder Settings for Scotts DiseaseEx Lawn Fungicide – 2¼ ( Prevention Purposes), 3¾ ( Treatment Purposes)
- The Scotts Turf Builder Settings for Scotts WeedEx Prevent with Halts – 2¼
- The Scotts Turf Builder Settings for Scott Green Max Lawn Food – 3¾
- The Scotts Turf Builder Settings for Scotts® Turf Builder® Summer Lawn Food – 4
- The Scotts Turf Builder Settings for Scotts® Turf Builder® – 4
Settings for Scotts Turf Builder Lawn Food
If you are using the Turf Builder Spreader for the Scotts Turf Builder Lawn Food, you will have to adjust the spreader to 3¾. Then apply the product with the instructions provided on the label.
Settings for Scotts Turf Builder Thick’R Lawn Sun & Shade
Applying the ScottsTurf Builder Thick R Lawn Sun & Shade might look like an enormous task. Instead of using random settings, set the dial to 9 and work on the target area.
Scotts Turf Builder Halts Crabgrass Preventer with Lawn Food
If you want to use the Scotts Turf Builder with the Halt Crabgrass Preventer with Lawn Food, leave the settings at 3. If applied correctly, this setting is ideal for removing these weeds from the yard.
Settings for Scotts Turf Builder Winterguard Fall Weed & Feed
Do you have plans to use the Winterguard Fall Weed & Feed in your yard? If yes, then you should set the dial at 3½ before heading to the target area.
Settings for Scotts DiseaseEx Lawn Fungicide – 2¼ ( Prevention Purposes), 3¾ ( Treatment Purposes)
There are two different settings for the Scotts DiseaseEx Lawn Fungicide. If you are dealing with fungus, leave the 3¾. But if you want to keep them from the yard, leave the setting at 2¼.
Settings for Scotts WeedEx Prevent with Halts – 2¼
Are you looking for the settings needed for applying the ScottsWeedEx weed preventer to your yard? If yes, then you can set the spreader to 2¼
Settings for Scott Green Max Lawn Food
Anyone can use the Scotts Turf Builder to spread some Scotts Lawn Food. All they have to do is set the device to 3¾ and move around the target area.
Scotts Turf Builder Settings for Scotts® Turf Builder® Summer Lawn Food
The Scotts Turf Builder Summer Lawn works well for most lawns. But as you apply this substance, set the spreader to 4.
Tips for Caring for the Scotts Turf Builder
Asides from using the right settings for your spreader, you can also get the best results by taking proper care of the device. Now here are the steps needed for maintaining The Scotts Turf Builder.
Clean the Spreader
As you use the spreader, it tends to gather dirt that might affect its performance. But you can avoid future problems by removing the mess with a quick wash.
Lubricate the Spreader with Oil
Apply some lubricant to the movable parts of the spreader. With the right oil, your spreader will work perfectly for longer periods.
Break Lumpy Fertilizers
Since lumpy chunks of fertilizer do not work well with spreaders, it would help if you broke the hardened pieces into smaller bits. You can start by using a hammer or a tough piece of wood.
