Since its launch, the Scotts Rotary Spreader has become a favorite amongst many gardeners. After all, it comes with the right features for applying various chemicals.
But before you can use this model, you will have to adjust its settings. Although it looks complicated, you can finish this task within seconds.
Are you looking for the best settings for the Scotts Rotary Spreader? If yes, then check this article for these figures.
Scotts Rotary Spreader Settings
Here are some of the ideal settings for a Scotts Rotary Spreader with different products. But before using our guide, we suggest that you check the owner’s manual of the spreader or back of the applied.
- Scotts Rotary Spreader Settings for Scotts Lawn Builder Lawn Autumn Lawn Food ( 20g/sq.m) – 25
- Scotts Rotary Spreader Settings for Lawn Sand ( 136g/sq.m) – 30 ( go over areas twice)
- Scotts Rotary Spreader Settings for EverGreen Complete ( 35g/sq.m) – 27
- Scotts Rotary Spreader Settings for Scotts Lawn Builder Lawn Food plus Weed Control (20g/sq.m) – 26.5
- Scotts Rotary Spreader Settings for EverGreen Mow It Less ( 30g/sq.m) – 26
- Scotts Rotary Spreader Settings for EverGreen Autumn ( 35g/sq.m) – 28
- Scotts Rotary Spreader Settings for EverGreen Feed & Weed ( 35g/sq.m) – 28
- Scotts Rotary Spreader Settings for Grass Seed ( 35g/sq.m) – 30
Scotts Rotary Spreader Settings for Scotts Lawn Builder Lawn Autumn Lawn Food (20g/sq.m)
If you have plans to add some autumn lawn food to the grass, you can use the Scotts Rotary Spreader. But it would help if you set the dial at 25, especially when working with 20g/sq.m
Scotts Rotary Spreader Settings for Lawn Sand (136g/sq.m)
The Scotts Rotary Spreader works well with lawn sand. If you want to apply this item, set the Scotts Rotary Spreader to 30. Then move over the area twice to get the best results.
Scotts Rotary Spreader Settings for EverGreen Complete (35g/sq.m)
If you have plans to add some Evergreen Complete to the grass, you should leave the dial at 27. However, this setting is ideal for applying 35g worth of the product per sq.m.
Scotts Rotary Spreader Settings for Scotts Lawn Builder Lawn Food plus Weed Control (20g/sq.m)
Still, looking for extra settings for using the Scotts Rotary Spreader? If yes, apply some Scotts Weed Control with a 26.5 setting. Normally, this setting is ideal for working at 20g/sq.m
Scotts Rotary Spreader Settings for EverGreen Mow It Less (30g/sq.m)
According to its makers, EverGreen Mow It Less is a great item for your lawn. If you want to use this product, apply around 30g of this product per sq.m.
Scotts Rotary Spreader Settings for EverGreen Autumn (35g/sq.m)
Adding the EverGreen Autumn can seem like a great idea. But before applying this product, pick a setting of 28 for 35g/sq.m
Scotts Rotary Spreader Settings for EverGreen Feed & Weed (35g/sq.m)
You can use the Scotts Rotary Spreader to add some EverGreen Feed & Weed to your grass. If you are aiming for 35g/sq.m, set the dial to 28.
Scotts Rotary Spreader Settings for Grass Seed ( 35g/sq.m)
If you have plans to add some grass seed to your lawn, stick with a spreader setting of 30. With this figure, you should expect spectacular results.
How to Care for Your Scotts Rotary Spreader
Asides from using the right settings for your spreader, you can also get the best results by taking proper care of the device. Now here are the steps needed for caring for the Scotts Rotary Spreader.
Clean the Spreader
As you use the spreader, it tends to gather dirt that might affect its performance. But you can avoid future problems by removing the mess with a quick wash.
Lubricate the Spreader with Oil
Apply some lubricant to the movable parts of the spreader. With the right oil, your spreader will work perfectly for longer periods.
Break Lumpy Fertilizers
Since lumpy chunks of fertilizer do not work well with spreaders, it would help if you broke the hardened pieces into smaller bits. You can start by using a hammer or a tough piece of wood.
Check the Scotts Official Website
If you are not sure about the best settings for using the Scotts Rotary spreader, try checking the Scotts websit. After all, this platform has charts that show the best flow settings for the product for different tasks.
Contact the Customer Care Centre
If you have any issues with using this Scott Spreader, you should reach out to their customer center via mail or phone call. You can also check their website for any information that might help you with the product.
