Since its launch, the Groundwork Spreader has become one of the preferred tools for spreading materials. After all the device has the best features for performing such tasks.
Without the right settings for your Groundwork spreader, you might have issues with the machine As a result, you might have to spend hours looking for a proper guide. On top of that, you might even end up with the wrong figures.
Now, here are the settings for working with the Groundwork Spreader. Although they look simple, they are great at improving the performance of the device.
We would also like to add that most of our settings are based on a more generic list. But you can use these settings with many Groundwork spreaders.
Groundwork Spreader Settings Guide
Here are some suggested settings for using the Groundwork broadcast spreaders with various types of materials. But before using our guide, you can check the product label of your preferred chemical for any recommended spreader settings. Normally, most brands list out the best figures for spreaders on their packaging.
- Groundwork Spreader Settings for Granular Fertilizer : 3 – 5
- Groundwork Spreader Settings for Pelleted Fertilizer : 3-5
- Groundwork Spreader Settings for Fine Grass Seed : 3 – 4
- Groundwork Spreader Settings for Coarse Grass Seed: 4 – 5
- Groundwork Spreader Generic Settings for 1 – 10: 2.5 ( 3LBS / 1,000 SQ. FT)
- Groundwork Spreader Generic Settings for 1- 10: 3.5 ( 4LBS/1000 SQ. FT)
- Groundwork Spreader Generic Settings for 1 – 10: 4 ( 5LBS/ 1000 SQ. FT)
- Groundwork Spreader Generic Settings for 1 – 18 : 3 ( 3LBS/1000 SQ.FT)
- Groundwork Spreader Generic Settings for 1 – 18: 4 ( 4LBS / 1,000 SQ. FT)
- Groundwork Spreader Generic Settings for 1 – 18: 5 ( 5LBS/ 1000 SQ. FT)
- Groundwork Spreader Generic Settings for 1 – 24: 14 ( 3LBS/1000 SQ FT)
- Groundwork Spreader Generic Settings for 1 – 24: 16 ( 4LBS/1000 SQ FT)
- Groundwork Spreader Generic Settings for 1 – 24: 18 ( 5LBS/1000 SQ FT)
The Groundwork Spreader Settings for Granular Fertilizer
If you want to share some Granular Fertilizer, you will have to adjust the spreader to 3 – 5. As you use this setting, remember to maintain a spreader width of 8″ – 10″. If followed correctly, your lawn should look healthier as quickly as possible.
The Groundwork Spreader Settings for Pelleted Fertilizer
You can also use the Groundwork Spreader to spread a sample of this substance. For this task, allow the spreader width to remain at 10″ – 12″. As you use this setting, try to cover the target area completely.
The Groundwork Spreader Settings for Fine Seed
If you want to apply some coarse seed, leave the setting at 3 – 4. As for width, allow it to stay at 6″- 7″.
The Groundwork Spreader Setting for Coarse Seed
Do you still have plans to plant some coarse seed on your lawn? If yes, adjust the spreader to 4 – 5. Then allow the spreading width to remain at 8″ – 9″.
The Groundwork Spreader Generic Settings for 1 – 10 ( 3lbs/1000 sq ft)
If you are working with such Groundwork Spreaders. leave the dial at 2.5. But before you can get the expected results on your lawn, use this setting at a rate of 3lbs per 1000 sq. ft
The Groundwork Spreader Generic Settings for 1-10 ( 4lbs/ 1000 sq ft)
Are you thinking of using the spreader at a rate of 4lbs/1000 sq ft? If yes, then tune the device to 3.5 and head towards the target area.
The Groundwork Spreader Generic Settings for 1-10 ( 5lbs/1000 sq. ft)
As you use the type of spreaders at a rate of5llbs, make sure the dial remains at 3. After all, these figures ensure that the product covers the ground properly.
The Groundwork SpreadGeneric Settings for 1 – 18 ( 3LBS/ 1000 sq ft)
You can use the 1 – 18 models to spread various materials. But if you are planning to use these machines, set the machine to 3. Within a short period, you should expect the best results possible.
The Groundwork Spreader Generic Settings for 1 – 18 ( 4LBS/1000 sq ft)
While working at a rate of 4lbs/1000 sq ft, make sure the dial remains at 4. If you follow this setting, you should expect a proper growth of grass
The Groundwork Spreader Generic Settings for 1 – 18 ( 5LBs/1000 sq ft)
As you use a Groundwork spreader, leave the dial on 5. As expected, this setting is enough to make your garden better.
The Groundwork Spreader Generic Settings for 1 – 30 ( 3LBs/1000 sq ft)
Do you want the best settings for adjusting a Groundwork Spreader with 1 – 24 markings? If yes, leave the spreader on 13. Then apply your preferred material to the target area.
The Groundwork Spreader Settings for 1 – 30 ( 4LBS/1000 sq ft)
If your Groundwork spreader comes with 1 – 30 markings, then you can leave the setting on 15. As expected, this figure is ideal for working at a rate of 4LBS/1000 sq.ft
The Groundwork Spreader Settings for 1 – 30 ( 5LBS/1000 sq ft)
It is easy to adjust a Groundwork Spreader with 1 – 30 markings. You can start by leaving the setting on 17. Then walk around the target area and apply your preferred materials.
Wrap Up
The Groundwork line of spreaders can spread different materials in your yard. But if you want to perform this task correctly, you should have to adjust the spreader to suit the accompanying seed/soil/ chemical.
You can use this article as a guide to tuning your spreader. After all, we have listed some settings that will help you.
For instance, granular and Pelleted fertilizers fall between 3 – 5. As for fine and coarse seeds, you can stick to a setting of 3 – 4 and 3 – 5 respectively. As for the more generic settings for these spreaders, you can use settings between.
If you are looking for more settings for your spreader, reach out to the Groundwork customer service. Asides from offering repairs, this platform promises the right settings for using these devices.
