{"id":738,"date":"2022-06-18T06:50:03","date_gmt":"2022-06-18T06:50:03","guid":{"rendered":"https:\/\/settingslab.com\/?p=738"},"modified":"2022-06-18T06:50:03","modified_gmt":"2022-06-18T06:50:03","slug":"milorganite-spreader-settings","status":"publish","type":"post","link":"https:\/\/settingslab.com\/milorganite-spreader-settings\/","title":{"rendered":"Milorganite Spreader Settings Guide"},"content":{"rendered":"

Milorganite is a well-known fertilizer brand across the US and Canada. If you\u2019ve been into lawn dressing for a while, you\u2019ve probably heard about it as one of the best nitrogen fertilizers money can buy. This is why some people call it soil treatment and not your typical straight fertilizer \u2013 its primary component is nitrogen.<\/span><\/p>\n

As common with all fertilizers, soil treatment, and insecticides, you need to use proper spreader settings (based on your spreaders) to have a positive result after application. If you can\u2019t get settings for your spreader, you want to use something very close; else, you won\u2019t get a satisfactory result.<\/span><\/p>\n

\"milorganite<\/p>\n

Milorganite Spreader Settings Guide<\/b><\/h2>\n

In this article, we\u2019ve outlined some standard spreader settings for some of the popularly used lawn spreaders in the US and Canada. Also, if you don\u2019t see your type of spreader on the chart, you can use the quick spreader calibration guide below to sort things out.<\/span><\/p>\n

Milorganite Settings for Rotary Spreaders<\/b><\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Spreader<\/b><\/td>\nSettings for Established Lawn<\/b><\/td>\nSettings for New Lawn<\/b><\/td>\n<\/tr>\n
Ace Green Turf Delux<\/span><\/td>\n19<\/span><\/td>\n19 (two passes)<\/span><\/td>\n<\/tr>\n
Agway<\/span><\/td>\n19<\/span><\/td>\n19 (two passes)<\/span><\/td>\n<\/tr>\n
Earthway EV-N-Spread (most models)<\/span><\/td>\n19<\/span><\/td>\n19 (two passes)<\/span><\/td>\n<\/tr>\n
Fertilome<\/span><\/td>\n19<\/span><\/td>\n19 (two passes)<\/span><\/td>\n<\/tr>\n
Green Thumb<\/span><\/td>\n19<\/span><\/td>\n19 (two passes)<\/span><\/td>\n<\/tr>\n
Lawn Crafter (Quacker)<\/span><\/td>\n5<\/span><\/td>\n5 (two passes)<\/span><\/td>\n<\/tr>\n
Precision<\/span><\/td>\n9<\/span><\/td>\n9 (two passes)<\/span><\/td>\n<\/tr>\n
Red Devil<\/span><\/td>\n17<\/span><\/td>\n17 (two passes)<\/span><\/td>\n<\/tr>\n
Republic EZ<\/span><\/td>\n 14<\/span><\/td>\n14 (two passes)<\/span><\/td>\n<\/tr>\n
Scotts Edgeguard (Pro, Mini), Lawn Pro & Standard\u00a0<\/span><\/td>\n11.5<\/span><\/td>\n11.5 (two passes)<\/span><\/td>\n<\/tr>\n
Scotts basic, Delux Edge Control & Speedy Green Series<\/span><\/td>\n11.5<\/span><\/td>\n11.5 (two passes)<\/span><\/td>\n<\/tr>\n
Scotts Easy Green<\/span><\/td>\n29<\/span><\/td>\n29 (two passes)<\/span><\/td>\n<\/tr>\n
Southern States<\/span><\/td>\n19<\/span><\/td>\n19 (two passes)<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Milorganite Settings for Drop Spreaders<\/b><\/h2>\n\n\n\n\n\n\n\n\n
Spreader<\/b><\/td>\nSettings for Established Lawn<\/b><\/td>\nSettings for New Lawn<\/b><\/td>\n<\/tr>\n
Ames\/Earthway\u00a0<\/span><\/td>\n21<\/span><\/td>\n21<\/span><\/td>\n<\/tr>\n
Lawn Crafter (Quaker)<\/span><\/td>\n8<\/span><\/td>\n13<\/span><\/td>\n<\/tr>\n
Red Devil<\/span><\/td>\n11<\/span><\/td>\n12<\/span><\/td>\n<\/tr>\n
Republic WZ Grow<\/span><\/td>\n8<\/span><\/td>\n11<\/span><\/td>\n<\/tr>\n
Scotts Accu Green Series<\/span><\/td>\n10<\/span><\/td>\n16<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

While you\u2019re typically required to spread with two passes on new lawns so that you can get as much nitrogen in as possible, spreading both types of lawns will also follow different guidelines as per quantity.<\/span><\/p>\n

Milorganite Spreader Settings Guidelines<\/b><\/h2>\n\n\n\n\n\n\n
General Settings\u00a0<\/b><\/td>\nApplication<\/b><\/td>\n<\/tr>\n
Established Lawn<\/span><\/td>\n2,500 sq. ft. per 32 lbs. bag<\/span><\/td>\n<\/tr>\n
New Lawn<\/span><\/td>\n1,250 sq. ft. per 32 lbs. bag<\/span><\/td>\n<\/tr>\n
Weight Conversion<\/span><\/td>\n3 cups of Milorganite = 1lbs.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

At any rate, you should only use the spreader settings in this article as a guideline; you\u2019ll need to mark out a testing ground on your lawn to see your possible result before applying it to the entire lawn.<\/span><\/p>\n

Quick Spreader Calculation Guide<\/b><\/h2>\n

If you\u2019re using a spreader that\u2019s not on the chart, this quick five-step guide will help you develop an accurate setting for spreading milorganite. The guide also works for any type of lawn spreader with any soil banding and treatment material in case you encounter the same issue while trying to spread something else.<\/span><\/p>\n

    \n
  1. Open your spreader to \u00be of the entire settings gauge<\/span><\/li>\n
  2. Weigh out 6.5 pounds of milorganite into the spreader<\/span><\/li>\n
  3. Start application while walking at a steady pace (3.5MPH is ideal) until the spreader bucket is empty.\u00a0<\/span><\/li>\n
  4. Measure the lawn area you were able to work on; it should be about 500 sq. ft. If your area is close to 500 sq. ft., you can go ahead to skip step 5.<\/span><\/li>\n
  5. In cases where your measurement shows you\u2019ve widely deviated from 500 sq. ft., you can adjust the size of the openings and repeat steps 2 to 4 till you get closer to 500 sq. ft.<\/span><\/li>\n<\/ol>\n

    Lawn Spread Application Tips<\/b><\/h2>\n
      \n
    • Never attempt to spread products by hand. If you must touch the product with bare hands, make sure you maintain minimum contact. It\u2019s even better if you use a glove throughout the application exercise.<\/span><\/li>\n
    • Ensure that the hopper is closed before adding the product \u2013 you don\u2019t want to have fertilizer or soil treatment grains scattered all over the place.<\/span><\/li>\n
    • Ensure you clear walkways and the surface where you carried out your weighing. If the spilled quantity is too much, you can pack them up and return them to your bag, and if it\u2019s ignorable, you can sweep it to t the lawn.<\/span><\/li>\n
    • If a large quantity of milorganite is dumped on the lawn, gather whatever you can, and use a stiff broom to spread the remains.<\/span><\/li>\n
    • Make sure you\u2019re always ways walking at a steady pace when applying the fertilizer. Also, remember that the slower you walk, the more products will be deposited \u2013 you don\u2019t want your application rate to be overkill and end up wasting fertilizer.<\/span><\/li>\n
    • If you\u2019re using drop spreaders, you want to make sure you\u2019re overlapping the wheel marks to get even coverage.<\/span><\/li>\n
    • Always start the application from the longest edge of your lawn. Although this can change if you first need to use a testing ground for spreader calibration.<\/span><\/li>\n
    • During application, you want to always complete a turn first before reopening the spreader. You do this to minimize the amount of milorganite deposited on the hard surfaces around your lawn.<\/span><\/li>\n
    • Apply products while walking in opposite directions after each turn. A simple back-and-forth translational movement will do. For the cases where you need two applications, reduce the settings by half and use a crisscross movement for an efficient finish.<\/span><\/li>\n
    • Always clean the spreader after use \u2013 you don\u2019t want materials to reside in the hopper; it might alter your calibrations next time you want to use it.<\/span><\/li>\n
    • Refer to the manufacturer\u2019s guidelines for steps to cleaning, lubricating, and storing the spreader<\/span><\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"

      Milorganite is a well-known fertilizer brand across the US and Canada. If you\u2019ve been into lawn dressing for a while, you\u2019ve probably heard about it as one of the best nitrogen fertilizers money can buy. This is why some people call it soil treatment and not your typical straight fertilizer \u2013 its primary component is nitrogen. As common with all fertilizers, soil treatment, and insecticides, you need to use proper spreader settings (based on your spreaders) to have a positive result after application. If you can\u2019t get settings for your spreader, you want to use something very close; else, you <\/p>\n","protected":false},"author":1,"featured_media":739,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"nf_dc_page":"","footnotes":""},"categories":[10],"tags":[],"ppma_author":[13],"class_list":["post-738","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-machines","has_thumb"],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/settingslab.com\/wp-content\/uploads\/2022\/06\/milorganite-spreader-settings.jpg?fit=640%2C400&ssl=1","authors":[{"term_id":13,"user_id":1,"is_guest":0,"slug":"slauthor","display_name":"Danny Saunders","avatar_url":{"url":"https:\/\/settingslab.com\/wp-content\/uploads\/2022\/08\/faviwhite.jpg","url2x":"https:\/\/settingslab.com\/wp-content\/uploads\/2022\/08\/faviwhite.jpg"},"user_url":"https:\/\/settingslab.com","last_name":"Saunders","first_name":"Danny","description":"Danny Saunders is a tech enthusiast. He enjoys getting his hands dirty with the features and settings of tech products and pushing them to their limits just to know how to get the best from them and how well they can endure \"abuse\" without breaking down. He shares his findings on this blog."}],"_links":{"self":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts\/738"}],"collection":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/comments?post=738"}],"version-history":[{"count":2,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts\/738\/revisions"}],"predecessor-version":[{"id":741,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts\/738\/revisions\/741"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/media\/739"}],"wp:attachment":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/media?parent=738"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/categories?post=738"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/tags?post=738"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/ppma_author?post=738"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}