{"id":344,"date":"2021-12-19T14:06:57","date_gmt":"2021-12-19T14:06:57","guid":{"rendered":"https:\/\/settingslab.com\/?p=344"},"modified":"2021-12-19T14:06:57","modified_gmt":"2021-12-19T14:06:57","slug":"scotts-easy-green-spreader-settings","status":"publish","type":"post","link":"https:\/\/settingslab.com\/scotts-easy-green-spreader-settings\/","title":{"rendered":"Scotts Easy Green Spreader Settings"},"content":{"rendered":"

The Scotts Easy Green Spreader is one of the top tools for spreading chemicals on lawns or gardens. Asides from having different functions, this model is tough enough for regular use.<\/p>\n

As with most Scotts Spreaders, you can use this Easy Green to disperse different farm chemicals. However, you will have to adjust the settings on the spreader to get the best results.<\/p>\n

Now here are the various settings that you should use with Easy Green.<\/p>\n

\"scotts<\/p>\n

Scotts Easy Green Spreader Settings<\/h2>\n

Here are the best settings for using the Scotts Easy Green. But before you use these values, consult the manual of this product. You might even seek additional information from the Scotts website.<\/p>\n\n\n\n\n\n\n\n\n\n
\u00a0Chemical<\/strong><\/td>\n\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Easy Green Settings<\/strong><\/td>\n<\/tr>\n
Garden Fertiliser\u00a0 10-10-10<\/td>\n\u00a026<\/td>\n<\/tr>\n
Crabgrass Preventer 27 – 0 – 8<\/td>\n26<\/td>\n<\/tr>\n
Starter 18-22-6<\/td>\n26<\/td>\n<\/tr>\n
Weed ‘N’ Feed 25-0-8<\/td>\n26<\/td>\n<\/tr>\n
Winterizer 26- 0 – 13<\/td>\n26<\/td>\n<\/tr>\n
Lawn Fertilizer 24 – 0 – 10<\/td>\n26<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The Scotts Easy Green Settings for Garden Fertiliser 10-10-10<\/strong><\/h3>\n

Before you use the Garden Fertiliser, you will have to change some settings on the spreader. With this in mind, you should use a setting of 26.<\/p>\n

The Scotts Easy Green Settings for Crabgrass Preventer<\/strong><\/h3>\n

With crabgrass preventers, anyone can destroy crabgrass without much work. But to cover every inch of the grass, use the spreader with a setting of 26.<\/p>\n

The Scotts Easy Green Settings for Starter 18-22-6<\/strong><\/h3>\n

If you have plans to grow a new lawn, you can use a good starter. To get the best results, you will have to spread the chemical perfectly. For this task, you will have to set Easy Green to 26.<\/p>\n

The Scotts Easy Green Settings for Weed N’ Feed<\/strong><\/h3>\n

You can also use the spreader to distribute Weed N’ Feed across the grass. But first, it would help if you performed this task with the spreader set at 26.<\/p>\n

The Scotts Easy Green Settings for Lawn Fertilizer<\/strong><\/h3>\n

As with most products on our list, you can distribute lawn fertilizer with Easy Green. Bur before using this tool, adjust the spreader to 26.<\/p>\n

The Scotts Easy Green Settings for Winterizer<\/strong><\/h3>\n

It is easy to choose a setting for applying winterizers. All you have to do is leave the setting at 26.<\/p>\n

How to Use the Scott Easy Green Spreader<\/h2>\n

Do you want to know how to use the Scotts Easy Green Spreader? If yes, here are the best steps for using the Scotts Speedy Green 1000 with several agricultural chemicals.<\/p>\n

How to Apply Crabgrass Preventer with the Scotts Easy Green Spreader<\/strong><\/h3>\n

To apply crabgrass preventer on your lawn:<\/p>\n

    \n
  1. Pour in some crabgrass preventer into the spreader<\/li>\n
  2. Set the spreader to 26<\/li>\n
  3. Apply the chemical on a dry lawn<\/li>\n
  4. Wait for 24 hours before adding water.<\/li>\n
  5. Add the preventer for the second time.<\/li>\n
  6. Apply some Weed and Feed two weeks after adding the preventer.<\/li>\n<\/ol>\n

    How to Use Lawn Fertiliser with the Scotts Easy Green Spreader <\/strong><\/h3>\n

    Here are the steps needed to apply a lawn fertilizer with the Scotts Easy Green Spreader<\/p>\n

    Wet the Lawn<\/strong><\/p>\n

    Add some water to the grass. Then, wait for a few days before applying the fertilizer.<\/p>\n

    Wear Your Gloves and EyeWear<\/strong><\/p>\n

    As these chemicals are toxic, wear some gloves and protective eyewear. You can get these tools from any hardware store.<\/p>\n

    Get Your Spreader<\/strong><\/p>\n

    Pick your preferred spreader. Then apply the right setting for applying lawn fertilizer with this product. If you do not know the right settings to pick, check the bag of the item or use the settings on this article.<\/p>\n

    Apply the Fertilizer<\/strong><\/p>\n

    Spread the lawn fertilizer around the outer edges of the lawn. Then with a\u00a0 mowing pattern, fill out the middle of the lawn.<\/p>\n

    Keep in Storage<\/strong><\/p>\n

    Return the remaining fertilizer to its bag. Then place the spreader in a cool, dry place.<\/p>\n

    How to Use the Weed N’ Feed with Scotts Easy Green Spreader<\/strong><\/h3>\n

    Moisturize the Grass<\/strong><\/p>\n

    Ensure the grass is slightly wet. If it feels dry, add a slight amount of water.<\/p>\n

    Choose the Recommended Settings<\/strong><\/p>\n

    Adjust the spreader to suit the fertilizer. If you are not sure of the right value to use, stick to a setting of 26.<\/p>\n

    Add the Fertiliser<\/strong><\/p>\n

    With gloved hands, apply the Weed N Feed to the spreader. As you add the chemical, remember to follow the instructions listed for the product.<\/p>\n

    Apply the Fertiliser to the Grass<\/strong><\/p>\n

    Spread the fertilizer across the lawn and the grass. You should prevent any burns by covering every inch of the grass.<\/p>\n

    Store the Spreader<\/strong><\/p>\n

    Remove the unused chemical from the spreader and return it to its bag.\u00a0 Also,\u00a0 clean out the spreader before placing it in storage.<\/p>\n

    Tips for Caring for the Scotts Easy Green Spreader<\/h2>\n

    Clean the Spreader<\/strong><\/p>\n

    As you use the spreader, it tends to gather dirt that might affect its performance. But you can avoid future problems by removing the mess with a quick wash.<\/p>\n

    Lubricate the Spreader with Oil<\/strong><\/p>\n

    Apply some lubricant to the movable parts of the spreader. With the right oil, your spreader will work perfectly for longer periods.<\/p>\n

    Break Lumpy Fertilizers<\/strong><\/p>\n

    Since lumpy chunks of fertilizer do not work well with spreaders, it would help if you broke the hardened pieces into smaller bits. You can start by using a hammer or a tough piece of wood.<\/p>\n

    Use the Scotts Easy Green manual<\/strong><\/p>\n

    If you are not sure about the best settings for using the Scotts Easy Green spreader, try using its owner’s manual. After all, this booklet has a chart that shows the best flow settings for the product for different tasks.<\/p>\n

    Contact the Customer Care Center<\/strong><\/p>\n

    If you have any issues with using this Scott Spreader, you should reach out to their customer center via mail or phone call. You can also check their website for any information that might help you with the product.<\/p>\n","protected":false},"excerpt":{"rendered":"

    The Scotts Easy Green Spreader is one of the top tools for spreading chemicals on lawns or gardens. Asides from having different functions, this model is tough enough for regular use. As with most Scotts Spreaders, you can use this Easy Green to disperse different farm chemicals. However, you will have to adjust the settings on the spreader to get the best results. Now here are the various settings that you should use with Easy Green. Scotts Easy Green Spreader Settings Here are the best settings for using the Scotts Easy Green. But before you use these values, consult the <\/p>\n","protected":false},"author":1,"featured_media":345,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"nf_dc_page":"","footnotes":""},"categories":[10],"tags":[],"ppma_author":[13],"class_list":["post-344","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-machines","has_thumb"],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/settingslab.com\/wp-content\/uploads\/2021\/12\/scotts-easy-green-spreader-settings.jpg?fit=600%2C372&ssl=1","authors":[{"term_id":13,"user_id":1,"is_guest":0,"slug":"slauthor","display_name":"Danny Saunders","avatar_url":{"url":"https:\/\/settingslab.com\/wp-content\/uploads\/2022\/08\/faviwhite.jpg","url2x":"https:\/\/settingslab.com\/wp-content\/uploads\/2022\/08\/faviwhite.jpg"},"user_url":"https:\/\/settingslab.com","last_name":"Saunders","first_name":"Danny","job_title":"","description":"Danny Saunders is a tech enthusiast. He enjoys getting his hands dirty with the features and settings of tech products and pushing them to their limits just to know how to get the best from them and how well they can endure \"abuse\" without breaking down. He shares his findings on this blog."}],"_links":{"self":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts\/344","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/comments?post=344"}],"version-history":[{"count":2,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts\/344\/revisions"}],"predecessor-version":[{"id":347,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/posts\/344\/revisions\/347"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/media\/345"}],"wp:attachment":[{"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/media?parent=344"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/categories?post=344"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/tags?post=344"},{"taxonomy":"author","embeddable":true,"href":"https:\/\/settingslab.com\/wp-json\/wp\/v2\/ppma_author?post=344"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}